Product Introduction

SS series single-shaft shredder is suitable for shredding plastic materials with high performance, high efficiency, high yield and other three high small and medium-sized shredding equipment. It is suitable for shredding plastic products with high toughness and high hardness, pipe, glue head, nozzle material, machine head material, etc. Single-shaft shredder PTSS series machine is equipped with push material setting and PLC automatic control system to realize intelligence.

Equipment characteristics

1. The cutter adopts D2 material, and the fixed cutter adopts D2 material.
2. For hollow and large volume materials, you can choose the press device.
3. Automatic overload protection function, to avoid serious overload and stuck machine.
4. The main electrical control components using Siemens and Schneider and other international brands.
5. The use of split combination technology, can quickly and effectively replace the blade.
6. The moving tool can be replaced after using the cutting edge for 2 times, reducing the operating cost.
7. Screen interchangeability, easy to replace.
8. The guide bar and guide block can be replaced and adjusted to maintain smooth pushing and sealing of the crushing chamber.

Technical reference

Model	PTSS600	PTSS800	PTSS1200	PTSS1500
Feed size A*B (MM)	500*580	850*800	850*1200	850*1400
Maximum capacity (kg/h)	500	1200	2000	2200
Knife roll diameter (MM)	250	400	400	400
Moving knives (pcs)	26	38	58	82
Fixed knives (pcs)	4	4	4	4
Screen size (MM)	40	40	40	40
Motor power (KW)	18.5	37	55	75
Hydraulic station power (KW)	1.5	3.7	5.5	5.5
Overall dimension L*W*H (MM)	1760*1300*1850	2850*1760*2210	2850*2560*2330	2850*2760*2330
Machine weight (KG)	1750	4150	5300	5900

Note: The maximum production capacity is non-ABS rubber head, with 40mm screen diameter measurement

Working principle

Plastic shredder (single shaft) is mainly composed of spindle, blade, fixed knife, box, feeding system, pushing system, power system and so on. This is the use of moving knife and fixed knife interaction, and through the screen to control the size of the discharge, the material is shredded, cut, extrusion processing to a smaller size. It is often used for the primary crushing of various plastic solid waste, and the material can be processed to a smaller size at one time. It has the characteristics of controllable discharge particle size, wide applicability of materials and high efficiency.

Main components

Scope of application

The main crushing materials of single-shaft plastic shredder: plastic, head material, plastic head material, water mouth material, plastic block, plastic, film, agricultural film, plastic film, PP woven bag, ton bag, ton bag, stretch film, greenhouse film, pipe, PE bottle, sundry plastic bottle, plastic table stool, foam and so on.